Ships November 2025.
This kit will allow you to upgrade a ProForge 4.x/300 to a ProForge 5 as if you purchased a pure ProForge 5 machine.
Improvements:
- Up to 5 print heads
- Larger 500x400x500mm Build Volume
- Smart Orbiter v3.5 print heads
- Auto-Nozzle alignment calibration
- Auto-Z-offset TAP calibration
- Dock and Select Sensors for tool pickup failure detection
- 300% Improved Part Cooling
- Side mounted electronics compartment
- Heated Chamber
- Dry Box
- Free-standing design
- RGBW Neon LED
The kit assumes that you have the following components from your previous machine to re-use in the building of the ProForge 5:
- TFT50 Touch Screen Display
- Eddy Probe
- Meanwell 24v PSU
- Meanwell 48V PSU
- SSR Relay
- 24V to 5V Convertor
- At least 3 Oldham Couplings
- At least 3 z-motors
- 4 LDO gantry motors
- USB Camera
- Servo Motor
ProForge 4.0/4.1
If you are upgrading from a ProForge 4.0/1 then you will also need the Eddy Probe, updated Servo Motor and Oldham Couplings (4).
Print Heads:
For Proforge 4.2 and 300 the print heads can be re-used. For the ProForge 4.0/4.1 the newer print heads will need to be purchased. Please add print heads accordingly.
This conversion kit comes with a fresh set of fasteners for the machine and all print heads.
