Pre-assembled with 3 year warranty and VIP e-mail support!
Includes free high temp. upgrade for both sides of the switching hotend!
Pre-order item. Estimated Dispatch December 2021.
Filament not included.
What you may also need (not included):
• Philips Screwdriver
• Small Flat Head Screwdriver
• Craft Knife
Build manual TBR.
The Proforge 3 3D printer kit and its upgrades come with a 1 year warranty for parts. If you believe a part to be faulty or damaged please contact us.
Operate the Proforge 3 3D printer in a well ventilated, open and dry environment.
Be aware of the moving parts, there is a pinching hazard.
Be cautious of the Hotend, it can reach temperatures exceeding 200 degrees Celsius, this is hot enough to cause severe burns. Even after operation the hotend can still be hot, allow time for it to cool before touching.
Keep children and pets away from the Proforge 3 3D printer whilst in operation.
Never disconnect any of the wiring whilst powered on.
Be careful of long hair and loose clothing when operating the Proforge 3 3D printer.
Immediately shut down the Proforge 3 3D printer if an error occurs to prevent damage to the unit or its surroundings.
THIS PRODUCT IS A DO-IT-YOURSELF KIT TO BE ASSEMBLED BY THE USER AT THEIR OWN RISK. MAKERTECH 3D LTD DISCLAIMS ALL RESPONSIBILITY, RISK OR LIABILITY OF ANY DAMAGE OR INJURY TO YOURSELF OR ANY PERSON OR PROPERTY FROM ITS USE.
NEITHER MAKERTECH 3D NOR ITS SUPPLIERS SHALL BE LIABLE TO YOU OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES (INCLUDING IN EACH CASE, BUT NOT LIMITED TO, DAMAGES FOR THE INABILITY TO USE OR ACCESS THE PRODUCTS, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCTS, EVEN IF MAKERTECH 3D HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
MAKERTECH 3D IS NOT RESPONSIBLE FOR ANY PRODUCTS (3D PRINTED PARTS OR OTHER) PRODUCED WITH THE AXIS 3D PRINTER OR ANY OF MAKERTECH 3D'S OTHER PRODUCTS. IN NO EVENT SHALL MAKERTECH 3D BE LIABLE FOR ANY DAMAGE OR INJURY OCCURRED BY USING PRODUCTS PRODUCED BY THE AXIS 3D PRINTER OR ANY OF ITS OTHER PRODUCTS.
NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE ENTIRE LIABILITY OF MAKERTECH 3D AND ANY OF ITS SUPPLIERS ARISING FROM OR RELATED TO THE USE OF THE PRODUCTS SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCTS CONCERNED.
THE CUSTOMER HAS READ THE SAFETY INSTRUCTIONS PROVIDED IN THE MANUALS TO BUILD THE DIY-PRODUCTS OF MAKERTECH 3D. THE CUSTOMER ALSO AGREES IN FOLLOWING THESE SAFETY INSTRUCTIONS