The all metal desktop 3D printer kit with 200x300x300mm build volume, touch screen display / SD card reader, heated bed, automatic bed levelling, filament sensor, aluminium and steel construction, open-builds mechanics, and 24V power.
- Touch Screen Display / SD Card Reader
- Automatic Bed Levelling
- Filament Sensor
- Aluminium and Steel Construction
- Openbuilds Mechanics
- 24V Power Supply
- All Metal Hotend
- 200x300mm 24V PCB Heat Bed with external MOSFET
- Silent TMC2100 Stepper Drivers (x2)
- Additional Frame Supports
- Dual Z-Axis Motor, Lead Screw and Anti-Backlash Nut
- Silicone Hotend Sock
Build Volume: 200x300x300mm
Print Speeds: Up to 100mm/s
Hotend Temperatures: Up to 280°C
The kit contains most of the tools you will need for a
• Allen Keys
• Cable Ties
• Ceramic Screwdriver
• Craft Knife
• Needle Nose Pliers
• PTFE Tape
• Slip Joint Pliers
What you will also need (not included):
• Philips Screwdriver
• Clear Tape
• Measuring Tape
• Side/Wire Cutters
All downloads are available here.
Build manual available here.
The Proforge 2S 3D printer kit and its upgrades come with a 1 year warranty for parts. If you believe a part to be faulty or damaged please contact us.
Operate the Proforge 2S 3D printer in a well ventilated, open and dry environment.
Be aware of the moving parts, there is a pinching hazard.
Be cautious of the Hotend, it can reach temperatures exceeding 200 degrees Celsius, this is hot enough to cause severe burns. Even after operation the hotend can still be hot, allow time for it to cool before touching.
Keep children and pets away from the Proforge 2S 3D printer whilst in operation.
Never disconnect any of the wiring whilst powered on.
Be careful of long hair and loose clothing when operating the Proforge 2S 3D printer.
Immediately shut down the Proforge 2S 3D printer if an error occurs to prevent damage to the unit or its surroundings.
THIS PRODUCT IS A DO-IT-YOURSELF KIT TO BE ASSEMBLED BY THE USER AT THEIR OWN RISK.
MAKERTECH 3D LTD DISCLAIMS ALL RESPONSIBILITY, RISK OR LIABILITY OF ANY DAMAGE OR INJURY TO YOURSELF OR ANY PERSON OR PROPERTY FROM ITS USE.
NEITHER MAKERTECH 3D NOR ITS SUPPLIERS SHALL BE LIABLE TO YOU OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES (INCLUDING IN EACH CASE, BUT NOT LIMITED TO, DAMAGES FOR THE INABILITY TO USE OR ACCESS THE PRODUCTS, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCTS, EVEN IF MAKERTECH 3D HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
MAKERTECH 3D IS NOT RESPONSIBLE FOR ANY PRODUCTS (3D PRINTED PARTS OR OTHER) PRODUCED WITH THE PROFORGE 2S 3D PRINTER OR ANY OF MAKERTECH 3D'S OTHER PRODUCTS.
IN NO EVENT SHALL MAKERTECH 3D BE LIABLE FOR ANY DAMAGE OR INJURY OCCURRED BY USING PRODUCTS PRODUCED BY THE PROFORGE 2S 3D PRINTER OR ANY OF ITS OTHER PRODUCTS.
NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE ENTIRE LIABILITY OF MAKERTECH 3D AND ANY OF ITS SUPPLIERS ARISING FROM OR RELATED TO THE USE OF THE PRODUCTS SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCTS CONCERNED.
THE CUSTOMER HAS READ THE SAFETY INSTRUCTIONS PROVIDED IN THE MANUALS TO BUILD THE DIY-PRODUCTS OF MAKERTECH 3D. THE CUSTOMER ALSO AGREES IN FOLLOWING THESE SAFETY INSTRUCTIONS
Final shipping costs are calculated in cart, these are estimates for ordering this item alone.
UK: £7.99 GBP
Europe: £15.99 GBP
USA/Canada: £35 GBP
Rest of the world: £50 GBP